global force polyhedron_1435653962.jpg

3D Graphic Statics: Geometric Construction of Global Equilibrium

Akbarzadeh M., Van Mele T. and Block P.
Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium
Amsterdam
2015

Graphic Statics provides a collection of procedures for the design and analysis of two-dimensional structural systems, involving only geometric operations on two-dimensional form and force diagrams. Unfortunately, the applicability of Graphic Statics to three-dimensional problems is limited. Only three-dimensional problems that can be replaced by an equivalent series of two-dimensional problems, can be addressed.

Revious research has shown how the equilibrium of three-dimensional systems of forces can be described using polyhedral form and force diagrams. However, procedures for solving specific design and analysis problems with these polyhedral diagrams have not yet been developed. One of the fundamental procedures in traditional (2D) Graphic Statics is to establish global equilibrium for given boundary conditions, and to use this information to construct different funicular solutions for the specified loads and supports. Therefore, in this paper, as a first step in the development of truly 3D Graphic Statics, we describe an equivalent procedure for given, three-dimensional boundary conditions. The procedure involves only geometric operations on polyhedral form and force diagrams.

The method, as it is presented here, is only applicable to statically determined systems of forces in which the applied loads do not generate a resultant couple. We give an overview of the well known procedure in 2D Graphic Statics to identify its key concepts and constructive elements, and describe the different steps of the three-dimensional version in detail.

BibTeX

@inproceedings{Akbarzadeh2015,
    author    = "Akbarzadeh, M. and Van Mele, T. and Block, P. ",
    title     = "3D Graphic Statics: Geometric Construction of Global Equilibrium",
    booktitle = "Proceedings of the  International Association for Shell and Spatial Structures (IASS) Symposium",
    year      = "2015",
    editor    = "",
    volume    = "",
    number    = "",
    pages     = "",
    publisher = "",
    address   = "Amsterdam",
    month     = "August",
    doi       = "",
    note      = "",
}

Related publications

Akbarzadeh M., Van Mele T. and Block P.On the Equilibrium of Funicular Polyhedral Frames and Convex Polyhedral Force Diagrams,Computer-Aided Design,63: 118-128,2015.
Akbarzadeh M., Van Mele T. and Block P.Equilibrium of spatial networks using 3D reciprocal diagrams,Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2013,Obrębski, J.B. and Tarczewski, R. (editors),Wroclaw, Poland,2013 (September).
ETH ZurichDARCHITA

 

ETH Zurich
Institute of Technology in Architecture
Block Research Group
Stefano-Franscini-Platz 1, HIB E 45
8093 Zurich, Switzerland
haake@arch.ethz.ch
block.arch.ethz.ch

+41 44 633 38 35  phone
+41 44 633 10 53  fax

Copyright © 2009-2024 Block Research Group, ETH Zurich, Switzerland.